METRIC DIMENSIONS

Cut a strip of cardboard that is 75 mm wide.

Draw a line from the bottom left corner of the strip to a point that is 10.5 mm from the top left corner.

Draw another line from a point 45mm from the bottom left corner to a point that is 34.5 mm from the top left corner.

Cut along these two lines to make your basic loom shape.

Now mark the top and bottom edges at 3 mm intervals with marks that are 3 mm long.
You should have 7 marks along the top and 14 along the bottom.

Cut slits where you have made marks.

Return to the general instructions